This exclusive SupraSport install solution is a stainless-steel braided fuel hose kit for the Aeromotive AFPR, -10 or -6 port units. The installation kit includes two hoses and four fittings, but the AFPR unit is sold seperately in this department. This TFE-core hose has a 2,500psi operating pressure and a minimum of 10,000psi burst rating! This hose is rated to perform from -100 to 450'F. All fittings are provided for your fuel rail and the AFPR unit. Adaptor size option is provided so you can select to match to your AFPR. The more popular -6an size is what we provide with our AFPR bundles. You can choose the larger -10an size if you have a different AFPR, typically used on cars over 650HP.
Install: Remove the stock AFPR from the fuel rail. Use the new supplied blue 12mm fitting with washer, thread it into the fuel rail. Use a light application of teflon pipe paste on the threds. (Don't use tape, it can shread and get caught in the systems passages.) Securely attach the three fittings on the AFPR, no paste is needed here, the o-rings do the job. Now attach your hoses for the AFPR inlet and outlet. Remove the hoses to/from the J-Tube. Locate the fuel-return hardline near the car's frame. Cut the factory fuel-return rubber hose a few inches up from the hardline. Clamp the hose connector onto the SS hose's straight tube. Mount the AFPR to the strut tower. Attach the 1/4" pressure control hose from the original factory location. Follow the instructions provided with the AFPR to set the base fuel pressure level.
Related Optional Parts: Strut-tower AFPR mount bracket. Blocking plate used to replace the J-Tube on the engine-block.