| HD Adjustable Swaybar endlinks, 86.5-92 Supras These end links use high strength rod ends, assembled with grade 8 cad-plated hardware. They are bolt on and adjustable up to 3/4" shorter and 1" longer over stock. The adjustability is necessary when using on an aftermarket sway bar, such as on the rear bar of the Suspension Technics swaybar kit. When using the "stiff" hole on the bar the stock end link too short and it pulls the ends of the bar down which puts the link at a sharp angle. The sharp angle leads to binding and possible breakage of the lower mounting tab. (those of you with aftermarket sway bars know this already).
We have also developed a weld on reinforcing tab for the rear lower link mount. As stated above, the stock rear lower link mount is prone to breakage when aftermarket sway bars are used. These reinforcements just need about 5 minutes of welding per side to attach. We will include them for only $25 when ordered with a rear end link set. The tab can be seen in the picture of the rear endlink below. It fits on the outside of the factory link mount.
*Note* One pair of end links will do one end of the car; two pairs will be needed to do the whole car. |